Daltex – Rubber Flooring
26 standard DalTex finishes are available.
Daltex textured tiles are available in any of our 80 gorgeous DalColours.
DalTex Domestic Specifications
Natural or synthetic
You can now choose to have your Dalsouple floor made in either standard synthetic SBR rubber, or DalNaturel natural rubber, the eco-friendly alternative. DalNaturel is available in all but the very palest colours in the range. To find out if your choice is available in DalNaturel, just contact us.
We have 80 standard DalColours.
The colours shown on this site are as accurate as possible. However, for an exact colour match we recommend you ask us for a real colour sample before ordering.
Because we make all our products to order, it is essential that all the material required for each installation is ordered in one batch to avoid variation in colour. If you order more than one Dalsouple product in the same colour, for example DalTex and DalUni, due to batch manufacturing it is not possible ot obtain an exact colour match between the two products.
26 standard DalTex finishes. For fine finishes please see DalMicro.
DalTex tiles 680mm x 680mm.
Granita, Pastille Alpha and Ardoise Italienne finishes 610mm x 610mm for access panels.
Ardoise Italienne finish 340mm x 340mm
DalTex tiles 2.5mm, 3.5mm and 4mm depending on finish. Please refer to individual pattern swatches for thickness.
Special thicknesses are available to order. Dalsouple recommends a minimum thickness of 2.5mm for flooring use. The thinner the floorcovering, the more visible the subfloor imperfections will be.
- Noise absorbent
- Cigarette burn resistant
- Easy to maintain
Indoor surfaces and floors, walls, columns and furniture
Dalsouple rubber is designed to offer a good degree of slip resistance underfoot in dry conditions. However, it can still be slippy when wet. To minimise the risk of slippage, it is important to use effective entrance matting around all external entrances, and to use signs when cleaning takes place
Available on request: oil and grease resistant, dissipative, electrically conductive, EFT extra flame resistant, low smoke and EFR, outdoor quality, WFR Class ‘O’ for use on walls on ceilings, MFR marine fire resistant, EUVS (extra UV stabilised). Due to technical limitations, not all colours are available in these qualities.
Standards and certification
Dalsouple tiles meet European standards in all key performance areas.