Mind The Gap!
A common question that people ask London flooring contractors is what is the correct gap between flooring panels and floorboards. Unfortunately, there’s no certain answer as it all depends on the type of wood-based flooring that is used, what are the conditions of use and where exactly it is installed. Important aspects that should be considered are whether the London flooring is softwood or hardwood, whether strips, parquet or solid floorboards are used, what is the construction and so on. The possible alteration of levels of heating, wood type, initial moisture content in the London flooring will result into hundreds of likely answers. Each of them is dependent on more than one of the aforementioned factors.
- London flooring specialists point out that the problem in fitting wood-based floors is the moisture content. But what actually is a moisture content of a wood-based product? What are the possible effects on it of the conditions of use? Of course, the answer varies in a comprehensive way. London flooring professionals warn that things are not straightforward so if you are not sure it is better to contact a flooring expert for advice.
- A reliable London flooring company recommends you not to cramp the boards tightly if it is a solid hardwood floor. Hardwoods are usually dried to low levels so they will expand for sure when they adjust to the room – if you cramp them this will just worsen the situation. However, cramping is normal for softwood floorboards. It will alleviate the unfavourable gapping because the boards will settle in. However, if they are installed in a church hall that is heated intermittently they will not need cramping – to butt them up to one another will do the job. However, you should definitely seek advice from London flooring specialists if there is underfloor heating – these special circumstances need a professional word before dealing with them.
- What about laminates? They can be both very good or poor depending on how and where they were made. London flooring experts recommend paying a bit more for a certain product for a better outcome – this is the usual case with plywood. Another important aspect is to look how laminated panels are constructed. Usually if there are just few layers or very low-density wood is used, this means it will be less resistant to movement.
There is a lot to consider before you decide what gap you should leave between engineered, laminated panels or adjacent boards – what London flooring contractors say simply is “one size does not fit all”!
Inspired by www.contractflooringjournal.co.uk