Navigation Menu+
Commercial Flooring News

What Is The Better Alternative To Chipboard?

A lot of London flooring contractors are wondering if there is something better than a flooring grade, water-resistant chipboard if some water-leak accidents happen into the underfloor area in their buildings. A lot of people are mislead that plywood is not available in a grooved and toned format. However, this is not the case.

  • Plywood is commonly applied as overlayment of old floor-boards and not as decking surface as generally chipboard panels are. However, London flooring experts point out that there’s a long history of plywood having applied as a floor deck, especially in North America where both Canada and the USA use it in their timber-framed houses. Flooring specialists in London say that there are a lot of advantages of applying plywood over chipboard as a floor decking material – it is much stronger and yet it can be used in a smaller thickness, generally 12mm is the better alternative for a sturdy floor deck than the 22mm chipboard.
  • Using chipboard for regular flooring is not wrong, but London flooring professionals claim that good quality plywood is more engineered wood-based panel flooring solution in London. Because of that it can be incorporated into stiffer and stronger floors in a diversity that will be significantly more difficult to achieve with the chipboard. If the right type of plywood is chosen, the durability of the London high-quality flooring will be good and more resistant to problems related to moisture penetration.
  • However, no matter how tempting is to think that Maritime Plywood is appropriate for such uses, an experienced flooring company in London says there are some things that should be considered beforehand. First of all, proper Maritime Plywood have to be manufactured according to BS 1088. If it isn’t manufactured like that, calling it ‘Maritime Plywood’ on sales or in a catalogue won’t make it so. The other thing is that such plywood have to be rated for flooring usage which means that it should have load-enduring capability. If is going to be installed as a London flooring solution in a place where there is a chance of future water penetration, such as a floor over a basement, a fully waterproof glue-bond must be applied. It is essential for the plywood to be made from veneers which have moderate degree of resistance to rot.

However, London flooring contractors shared the downside to installing plywood – the good one used for flooring solution in London will cost you more than the water-resistant flooring grade chipboard!

Inspired by www.contractflooringjournal.co.uk