Caring For Your Rubber Floor
General Tips
- After installation sweep the floor clean
- Remove any excess adhesive
- No wet cleaning for 7 days to allow adhesive to cure
All maintenance products are available at our branches –please call first to ensure adequate stock.
To Strip The Floor – PRO 1 Heavy Duty Stripper
- Dilute with cold water – 1: 10
- Apply sparingly to floor surface for 5-10 minutes – do not allow to dry out
- Use scourer to remove any contaminates – not too hard – may scratch floor !
- Use more dilute PRO 1 as required
- After 5 – 10 minutes mop up residue, rinse with cold water & allow to dry
Sealing The Floor – PRO 3 Emulsion Or Satin Floor Dressing
- Apply 2 or more coats of PRO 3 well shaken when floor is dry using applicator
- Remove loose fluff
- Pour neat to the applicator and on the floor in thin even strokes
- Allow first coat to dry thoroughly & apply second coat at right angles to first
Maintaining The Floor – PRO 4 Finisher/Maintainer
- Ensure floor totally free from dust before cleaning
- Dilute with cold water – 1: 50 when damp mopping
- Use PRO 4 as a floor finish –apply two neat coats evenly
- Allow first coat to dry thoroughly & apply second coat at right angles to first
IMPORTANT – PRO 1 is a corrosive material – read instructions carefully before use!