Navigation Menu+

Dalmagnetic – Rubber Flooring










An innovative solution for access floor installations. Tiles are fusion-bonded to a flexible magnetised backing and can be loose-laid on metallic access panels.

9 standard Dalmagnetic finishes are available.








Dalmagnetic textured tiles are available in any of our 80 gorgeous DalColours (shown below). DalMagnetic is also available with DalMarbre, DalTerrazzo and DalFusion.












Dalmagnetic Domestic Specifications

Natural or synthetic
You can now choose to have your Dalsouple floor made in either standard synthetic SBR rubber, or DalNaturel natural rubber, the eco-friendly alternative. DalNaturel is available in all but the very palest colours in the range. To find out if your choice is available in DalNaturel, just contact us.

Colour availability
There are 10 standard colourways in the DalMarbre range.

Colour reproduction
The colours shown on this site are as accurate as possible. However, for an exact colour match we recommend you ask us for a real colour sample before ordering.

Colour variation
Because we make all our products to order, it is essential that all the material required for each installation is ordered in one batch to avoid variation in colour. If you order more than one Dalsouple product in the same colour, for example DalTex and DalUni, due to batch manufacturing it is not possible ot obtain an exact colour match between the two products.

DalMarbre is available in DalUni smooth finish and 7 DalMicro finishes.

Tile Size

DalMarbre tiles with DalUni smooth finish:

  • 340mm x 340mm
  • 1760mm x 680mm
  • or 610mm x 610mm for access panels.

DalMarbre with DalMicro:

  • 1760mm x 680mm.

DalMarbre tiles:

  • 1.5mm, 2mm, 2.5mm
  • 3mm, 3.5mm, 4mm or
  • 4mm with eco backing.

DalMarbre with DalMicro:
2.5mm or 4mm (with eco backing) depending on finish.
Special thicknesses are available to order.

Dalsouple recommends a minimum thickness of 2.5mm for flooring use. The thinner the floorcovering the more visible the subfloor imperfections will be.


  • Anti-slip
  • Anti-static
  • Noise absorbent
  • Cigarette burn resistant
  • Tough
  • Easy to maintain

Indoor surfaces and floors, walls, columns and furniture

Slip resistance
Dalsouple rubber is designed to offer a good degree of slip resistance underfoot in dry conditions. However, it can still be slippy when wet. To minimise the risk of slippage, it is important to use effective entrance matting around all external entrances, and to use signs when cleaning takes place

Special qualities
Available on request: oil and grease resistant, dissipative, electrically conductive, EFT extra flame resistant, low smoke and EFR, outdoor quality, WFR Class ‘O’ for use on walls on ceilings, MFR marine fire resistant, EUVS (extra UV stabilised). Due to technical limitations, not all colours are available in these qualities.

Standards and certification
Dalsouple tiles meet European standards in all key performance areas.