Navigation Menu+
Commercial Flooring News

Floor Installation In Areas With Drains Is Specific

Every London flooring company has faced a project where installation of flooring should be performed in spaces with drains available. London flooring contractors claim, that this is a clear process. However, in case the appropriate measures are not undertaken, this may lead to contaminants and water which may reach under the flooring. As a result London flooring specialists say that the flooring may lift and the floor may trap bacteria. Here are further details on the topic:

  • In humid ambiences, most often London flooring experts come across to circular drains which are clamped down.
  • In spaces where there are bigger quantities of water (for instance changing rooms, swimming pools and communal showers), linear drains are typical. No matter which kind of drains you meet, London flooring contractors say, that the necessary approach to apply should be the same.
  • London flooring specialists say that in case you perform a flooring installation in wet environment where there are manholes and drains, it’s important to withdraw the quilt and cut the flooring so it goes down within the drain till it’s vertical. This leads to running of liquids from the flooring and down into the drain.
  • London flooring experts warn that all may go wrong if the flooring is cut simply within the clamped down space, at floor level. Unfortunately, this happens sometimes.
  • London flooring contractors explain, that it means, that you can even see the edges of the flooring. This will look unsightly and unprofessional. Some liquids will go underneath the flooring driving it to lift. This way the ideal environment for bacteria and dirtiness will be created.
  • London flooring specialists may fix the problem and it won’t be very difficult if they are really experienced.

London flooring contractors advise that if you are the experts called to deal with this problem, the only way for efficient repair is to put in a brand new section of flooring that runs into the drain. Normally, it should be cut and welded far enough away from the drain to avoid comparable problems. No matter that this won’t be notably attractive, but it will work.

Inspired by