Navigation Menu+
Commercial Flooring News

Stand The Wood On Its End

In this article, the lights are on wood flooring. London flooring specialists say that very different and attractive floors can be achieved by standing the wood on its end. You can achieve that by using wood end-on – it`s not considered the ‘normal’ way in which you use wood with its grain that is orientated along the long axis of the board. However, there is a method in which the grain can be used at 90 degrees to the plane of the London flooring so the grain can stand out. The grain will not lie down along the plane of the floor – it will point upwards in the same way as a tree normally grows. ‘End-grain’ flooring is usually supplied as pre-cut blocks of a uniform dimension. They are laid adjacent to each other on a bed of mastic or similar compound.

  • A question you may ask to which London flooring experts patiently answer is why you should use it this way round. There are some timbers which you can capitalise on their growth pattern and naturally dense cell structure to create a hard-wearing London flooring. Such types are Spruce and Scandinavian pine – they are very suitable for commercial areas with high traffic such as airports, shopping malls, etc. It looks very different from what you are used to viewing as wood London flooring and if it is done properly it can be very attractive and eye-appealing.
  • Of course, as any other London flooring type, the ‘end-grain’ floor has its specifics. You probably have heard that wood behaves depending on the temperature and humidity. It will shrink if it dries out and gives a rise which is not desired causing gaps between the floorboards. This is why London flooring professionals place boards together as much as possible in order to minimise this issue and make the gaping later on as little as possible. ‘End-grain’ floors can cause twice as much problem because they will not shrink in one but two directions. London flooring experts explain that normal floorboards shrink primarily on their width and not in their length. However, end-drain blocks can shrink in both directions as they have both their width and thickness on show.
  • So, what’s the outcome of that? London flooring contractors say that as end-grain blocks shrink, they will develop gaps around all four of the sides. They might move a little but what is more important is that the fine, square grid-like pattern will be disrupted leaving the issue even more unappealing. What is the answer to installing the end-grain floorboards successfully? A respected flooring company in London explains that the moisture content should be accurately figured having in mind the humidity of the surroundings as well. No need to say that this London flooring requires good care but it’s worth it – you will get a unique look and have a floor which is very different from the regular stuff.

End-grain floors have their advantages but you should carefully consider their specific requirements as well. They can serve as very durable London commercial flooring – they have better resistance to abrasion due to the denser parts of the growth rings of wood. When the floor blocks are mounted in the right direction, this will result in a long-lasting floor that has a remarkable wear resistance. What do you think? Standing the wood on its end is worth it!

Inspired by