The First Clean Counts!
London flooring specialists share that many owners of newly installed floors wonder why they look dirty despite the fact the surface was cleaned numerous times after the installation. The truth is that when such case comes up, this is due to the lack of a good initial clean. Another interesting fact that London flooring contractors mention is that about 70% of all installation complaints result from a poorly looking floor. In combination with a poor maintain regime, the situation becomes worse. Speaking of tiles, you should know that once London flooring experts start installing them, the speed of the process is of utmost importance. When they stop to clean the surface, they have to do it promptly and thoroughly using the right detergent. This procedure may seem simple but it can save potential problems that may arise and save money, time and inconvenience.
- A reputable London flooring company says that performing an appropriate builders cleaning is vital, no matter what tiles are used. They can be natural stone, ceramic or porcelain – in accordance with their nature, a suitable detergent should be applied. Many people wrongly assume that using water is enough but they leave a grout haze behind. If the surface is non-porous, this will result in compromising with the looks and it will also attract dirt. If you have chosen non-slippery tiles, experienced London flooring contractors point out that failing to carry out this cleaning process may affect the non-slip properties.
- However, if the tiles need sealing (i.e. they are porous), more problems may arise. When the impregnator is applied, it can seal the residue dirt and lead to leaving a layer of dirt in between the tile and the sealer. This may result in underperformance of the sealer and prevent it from thoroughly absorbing into the porosity. Dirt buildups will appear and more grimes will be attracted. The final result – compromising with the safety and aesthetic of your new London flooring.
- What is the solution to this problem? Usually, it is a simple one. Figuring out which is the most suitable detergent – alkaline-based, acid-based or pH neutral – is all you have to do. London flooring specialists explain that pH scale ranges from 0-14. Anything that is in the middle (read 7) is considered to be neutral. Above 7 – we talk about alkaline and below 7 – acidic. Acids are better in getting rid of rust, calcium and mineral substances while alkaline solutions are good at removing grease, protein, oils and dirt substances. When treating glazed porcelain, ceramics, terracotta and quarry tiles, London flooring professionals warn that acid cleaners must be used. On the other hand, alkaline cleaners should not be applied on polished natural stone as they will result in damaging the polished finish. In this case, a pH neutral cleaner should be used. When you need to restore a surface, for instance, you have to deep clean a ceramic London flooring, ensure that the detergent is appropriate for this particular substrate.
- London flooring contractors state that stubborn residue can be challenging on textured porcelain or ceramic surfaces. In such cases a degreasing alkaline product will do the hard job efficiently.
Especially when speaking of London commercial flooring, an adequate cleaning and sealing have to be carried out as the expenses of a revisit to perform the tasks can be very high. This may be a great opportunity for the retailer or the tile fixer because it can safeguard good future referrals.
Inspired by www.contractflooringjournal.co.uk